Loading Envelopes

When printing on envelopes, please note the following:

• You can load up to 10 envelopes into the sheet feeder.

Note:

The folding quality and thickness of envelopes varies widely. If the total thickness of the stack of envelopes exceeds 10 mm, press each envelope in the stack flat before loading.

• Set the adjust lever to the "+" position. To change the setting, open the printer cover and reposition the lever.

Note:

Return the adjust lever to the "0" position, which is the normal position, after you finish printing on envelopes. Leaving the lever in the "+" position may cause printed images to have gaps on other media.

• Load envelopes flap edge first with the flap side down, as shown in the illustration.

• Do not use envelopes that are curled or folded. Make sure to flatten the envelope flaps before loading. Also avoid using envelopes that are too thin; they may curl during printing.

• Select Plain Paper as the Media Type setting on the printer driver.