Transporting the Printer

If you need to transport your printer some distance, carefully repack it using the original box and packing materials as follows:

Open the printer cover and make sure that the print head is in the home (far right) position. If not turn on the printer and wait until the print head returns to the home position. Turn off the printer and then close the printer cover.

Caution:

Leave the ink cartridges installed when you transport the printer. Removing the cartridges during transport can damage the printer.

Unplug the power cord from the electrical outlet; then disconnect the interface cable from the printer.

Remove the paper from the sheet feeder and remove the paper support.

Push in the output tray extension, and then raise the output tray.

Attach the protective materials to the printer.

Repack the printer and power cord in the original box.

Keep the printer level during transport.